Instructions Videos

How to install the Stealth Plates?

How to install the Motorcycle Stealth Plates?

My Stealth Plate Curtains are beeping

Make sure you are pressing the correct button (A or B) on the remote control, depending on where you connected the wire output in the Control Unit port.

  • E.g. if you connected the output wire into port “A” in the control unit, you must press the “A” button on the remote.

Make sure all your wires are connected properly and nothing is loose.

  • Check Input wires (Frame wire to Control Unit)
  • Check Output wires (Control unit to cigarette lighter)

My Stealth Plate Curtains are stuck/won’t roll down or up (jammed noise)

Dust or other small particles might be stuck between the frame belt overtime. 
Gently, open the frame and check if there’s anything obstructing the belt from moving.

  • Remove the screws from the motor belt section
  • Use a small clamp to hold the motor, and slightly rotate up/down gently.
  • Put back the screws and activate
  • Check our video below for guidance